### Gönderen Konu: Mavi Loca  (Okunma sayýsý 14516 defa)

0 Üye ve 1 Ziyaretçi konuyu incelemekte.

Eylül 02, 2009, 10:51:49 ös
Yanýtla #10
• Skoç Riti Masonu
• Aktif Uye
• Ýleti: 758
• Cinsiyet:

##### Ynt: Mavi Loca
Sayın Lux_e_Tenebris;

Öncelikle teşekkür ederim nâzik yorumunuz için.Öğrenmek için sorduğumda bir Kardeşiniz bana ;''Ritlere seçilmek kadar uygun zamanınızın olması da çok önemlidir , yeni bir başlangıçtır aslında demişti.Öyle sanıyorum ki düşünsel bazda hayli detay çalışma ve felsefî yoğunluk var Ritlerde.

Saygılar...
Size bilgiyi veren kisi dogru soylemis. Zaman cok onemli. Zamandan da onemli olan acik bir dimaga sahip olmak.

Basit bir ornek vereyim. Pi sayisini okulda ogrenebilirsiniz. 3.14 degerine sahip oldugunu da ogrenirsiniz. Fakat asagidaki bilgileri ogrenmek icin detaya inmeniz, imkanlarin elverdigi kaynaklari incelemeniz gerekir

Alýntý
Pi or π is a mathematical constant whose value is the ratio of any circle's circumference to its diameter in Euclidean space; this is the same value as the ratio of a circle's area to the square of its radius. The symbol π was first proposed by the Welsh mathematician William Jones in 1706. It is approximately equal to 3.14159 in the usual decimal notation (see the table for its representation in some other bases). π is one of the most important mathematical and physical constants: many formulae from mathematics, science, and engineering involve π.[2]

π is an irrational number, which means that its value cannot be expressed exactly as a fraction m/n, where m and n are integers. Consequently, its decimal representation never ends or repeats. It is also a transcendental number, which implies, among other things, that no finite sequence of algebraic operations on integers (powers, roots, sums, etc.) can be equal to its value; proving this was a late achievement in mathematical history and a significant result of 19th century German mathematics. Throughout the history of mathematics, there has been much effort to determine π more accurately and to understand its nature; fascination with the number has even carried over into non-mathematical culture.

The Greek letter π, often spelled out pi in text, was adopted for the number from the Greek word for perimeter "περίμετρος", first by William Jones in 1707, and popularized by Leonhard Euler in 1737.[3] The constant is occasionally also referred to as the circular constant, Archimedes' constant (not to be confused with an Archimedes number), or Ludolph's number (from a German mathematician whose efforts to calculate more of its digits became famous).
Contents
[hide]

* 1 Fundamentals
o 1.1 The letter π
o 1.2 Definition
o 1.3 Irrationality and transcendence
o 1.4 Numerical value
o 1.5 Calculating π
* 2 History
o 2.1 Geometrical period
o 2.2 Classical period
o 2.3 Computation in the computer age
o 2.4 Pi and continued fraction
o 2.5 Memorizing digits
* 3 Advanced properties
o 3.1 Numerical approximations
o 3.2 Open questions
* 4 Use in mathematics and science
o 4.1 Geometry and trigonometry
o 4.2 Complex numbers and calculus
o 4.3 Physics
o 4.4 Probability and statistics
* 5 Pi in popular culture
* 7 References
* 8 External links

Fundamentals
Lower-case π is used to symbolize the constant.
Circumference = π × diameter
Area of the circle = π × area of the shaded square
Squaring the circle: This was a problem proposed by the ancient geometers. In 1882, it was proven that π is transcendental, and consequently this figure cannot be constructed in a finite number of steps with an idealized compass and straightedge.

The letter π
Main article: pi (letter)

The name of the Greek letter π is pi, and this spelling is commonly used in typographical contexts when the Greek letter is not available, or its usage could be problematic. It is not capitalised (Π) even at the beginning of a sentence. When referring to this constant, the symbol π is always pronounced like "pie" in English (IPA: /paɪ/), which is the conventional English pronunciation of the Greek letter. In Greek, the name of this letter is pronounced [pi].

The constant is named "π" because "π" is the first letter of the Greek words περιφέρεια (periphery) and περίμετρος (perimeter), probably referring to its use in the formula to find the circumference, or perimeter, of a circle.[4] π is Unicode character U+03C0 ("Greek small letter pi").[5]

Definition

In Euclidean plane geometry, π is defined as the ratio of a circle's circumference to its diameter:[4]

\pi = \frac{C}{d}.

The ratio C/d is constant, regardless of a circle's size. For example, if a circle has twice the diameter d of another circle it will also have twice the circumference C, preserving the ratio C/d.

Alternatively π can be also defined as the ratio of a circle's area (A) to the area of a square whose side is equal to the radius:[4][6]

\pi = \frac{A}{r^2}.

These definitions depend on results of Euclidean geometry, such as the fact that all circles are similar. This can be considered a problem when π occurs in areas of mathematics that otherwise do not involve geometry. For this reason, mathematicians often prefer to define π without reference to geometry, instead selecting one of its analytic properties as a definition. A common choice is to define π as twice the smallest positive x for which cos(x) = 0.[7] The formulas below illustrate other (equivalent) definitions.

Irrationality and transcendence
Main article: Proof that π is irrational

Being an irrational number, π cannot be written as the ratio of two integers. This was proved in 1768 by Johann Heinrich Lambert.[8] In the 20th century, proofs were found that require no prerequisite knowledge beyond integral calculus. One of those, due to Ivan Niven, is widely known.[9][10] A somewhat earlier similar proof is by Mary Cartwright.[11]

Furthermore, π is also transcendental, as was proved by Ferdinand von Lindemann in 1882. This means that there is no polynomial with rational coefficients of which π is a root.[12] An important consequence of the transcendence of π is the fact that it is not constructible. Because the coordinates of all points that can be constructed with compass and straightedge are constructible numbers, it is impossible to square the circle: that is, it is impossible to construct, using compass and straightedge alone, a square whose area is equal to the area of a given circle.[13] This is historically significant, for squaring a circle is one of the easily understood elementary geometry problems left to us from antiquity; many amateurs in modern times have attempted to solve each of these problems, and their efforts are sometimes ingenious, but in this case, doomed to failure: a fact not always understood by the amateur involved.

Numerical value

The numerical value of π truncated to 50 decimal places is:[14]

3.14159 26535 89793 23846 26433 83279 50288 41971 69399 37510
See the links below and those at sequence A000796 in OEIS for more digits.

While the value of π has been computed to more than a trillion (1012) digits,[15] elementary applications, such as calculating the circumference of a circle, will rarely require more than a dozen decimal places. For example, a value truncated to 11 decimal places is accurate enough to calculate the circumference of a circle the size of the earth with a precision of a millimeter, and one truncated to 39 decimal places is sufficient to compute the circumference of any circle that fits in the observable universe to a precision comparable to the size of a hydrogen atom.[16][17]

Because π is an irrational number, its decimal expansion never ends and does not repeat. This infinite sequence of digits has fascinated mathematicians and laymen alike, and much effort over the last few centuries has been put into computing more digits and investigating the number's properties.[18] Despite much analytical work, and supercomputer calculations that have determined over 1 trillion digits of π, no simple base-10 pattern in the digits has ever been found.[19] Digits of π are available on many web pages, and there is software for calculating π to billions of digits on any personal computer.

Calculating π
Main article: Computing π

π can be empirically estimated by drawing a large circle, then measuring its diameter and circumference and dividing the circumference by the diameter. Another geometry-based approach, due to Archimedes,[20] is to calculate the perimeter, Pn , of a regular polygon with n sides circumscribed around a circle with diameter d. Then

\pi = \lim_{n \to \infty}\frac{P_{n}}{d}.

That is, the more sides the polygon has, the closer the approximation approaches π. Archimedes determined the accuracy of this approach by comparing the perimeter of the circumscribed polygon with the perimeter of a regular polygon with the same number of sides inscribed inside the circle. Using a polygon with 96 sides, he computed the fractional range: 3+10⁄71 < π < 3+1⁄7.[21]

π can also be calculated using purely mathematical methods. Most formulae used for calculating the value of π have desirable mathematical properties, but are difficult to understand without a background in trigonometry and calculus. However, some are quite simple, such as this form of the Gregory-Leibniz series:[22]

\pi = \frac{4}{1}-\frac{4}{3}+\frac{4}{5}-\frac{4}{7}+\frac{4}{9}-\frac{4}{11}\cdots.\!

While that series is easy to write and calculate, it is not immediately obvious why it yields π. In addition, this series converges so slowly that nearly 300 terms are needed to calculate π correctly to 2 decimal places.[23] However, by computing this series in a somewhat more clever way by taking the midpoints of partial sums, it can be made to converge much faster. Let

\pi_{0,1} = \frac{4}{1},\ \pi_{0,2} =\frac{4}{1}-\frac{4}{3},\ \pi_{0,3} =\frac{4}{1}-\frac{4}{3}+\frac{4}{5},\ \pi_{0,4} =\frac{4}{1}-\frac{4}{3}+\frac{4}{5}-\frac{4}{7}, \cdots\!

and then define

\pi_{i,j} = \frac{\pi_{i-1,j}+\pi_{i-1,j+1}}{2}\text{ for all }i,j\ge 1

then computing π10,10 will take similar computation time to computing 150 terms of the original series in a brute-force manner, and \pi_{10,10}=3.141592653\ldots, correct to 9 decimal places. This computation is an example of the van Wijngaarden transformation.[24]

History
See also: Chronology of computation of π and Numerical approximations of π

The earliest evidenced conscious use of an accurate approximation for the length of a circumference with respect to its radius is of 3+1/7th in the designs of the Old Kingdom pyramids in Egypt. The Great Pyramid at Giza, built c.2550-2500 B.C, was precisely 1760 cubits around with a height of 280 cubits (1760/280=2xPi). Egyptologists such as Professors Flinders Petrie [25]and I.E.S Edwards[26] have shown that these circular proportions were deliberately chosen for symbolic reasons by the Old Kingdom scribes and architects[27][28]. The same apotropaic proportions were used earlier at the Pyramid of Meidum c.2600 B.C. This application is archaeologically evidenced, whereas textual evidence does not survive from this early period.

The early history of π from textual sources roughly parallels the development of mathematics as a whole.[29] Some authors divide progress into three periods: the ancient period during which π was studied geometrically, the classical era following the development of calculus in Europe around the 17th century, and the age of digital computers.[30]

Geometrical period

That the ratio of the circumference to the diameter of a circle is the same for all circles, and that it is slightly more than 3, was known to Ancient Egyptian, Babylonian, Indian and Greek geometers. The earliest known textually evidenced approximations date from around 1900 BC; they are 25/8 (Babylonia) and 256/81 (Egypt), both within 1% of the true value.[4] The Indian text Shatapatha Brahmana gives π as 339/108 ≈ 3.139. The Hebrew Bible appears to suggest, in the Book of Kings, that π = 3, which is notably worse than other estimates available at the time of writing (600 BC). The interpretation of the passage is disputed,[31][32] as some believe the ratio of 3:1 is of an interior circumference to an exterior diameter of a thinly walled basin, which could indeed be an accurate ratio, depending on the thickness of the walls (See: Biblical value of π).
Archimedes' Pi aproximation
Liu Hui's π algorithm

Archimedes (287–212 BC) was the first to estimate π rigorously. He realized that its magnitude can be bounded from below and above by inscribing circles in regular polygons and calculating the outer and inner polygons' respective perimeters:[32]

By using the equivalent of 96-sided polygons, he proved that 3 + 10/71 < π < 3 + 1/7.[32] The average of these values is about 3.14185.

In the following centuries further development took place in India and China. Around AD 265, the Wei Kingdom mathematician Liu Hui provided a simple and rigorous iterative algorithm to calculate π to any degree of accuracy. He himself carried through the calculation to a 3072-gon and obtained an approximate value for π of 3.1416, as follows:

π ≈ A3072    = 3 ⋅ 28 ⋅ √(2 − √(2 + √(2 + √(2 + √(2 + √(2 + √(2 + √(2 + √(2 + 1)))))))))
≈ 3.14159

Later, Liu Hui invented a quick method of calculating π and obtained an approximate value of 3.1416 with only a 96-gon, by taking advantage of the fact that the difference in area of successive polygons forms a geometric series with a factor of 4.

Around 480, the Chinese mathematician Zu Chongzhi demonstrated that π ≈ 355/113, and showed that 3.1415926 < π < 3.1415927 using Liu Hui's algorithm applied to a 12288-gon. This value was the most accurate approximation of π available for the next 900 years.

Classical period

Until the second millennium, π was known to fewer than 10 decimal digits. The next major advance in π studies came with the development of infinite series and subsequently with the discovery of calculus, which in principle permit calculating π to any desired accuracy by adding sufficiently many terms. Around 1400, Madhava of Sangamagrama found the first known such series:

{\pi} = \frac{4}{1} - \frac{4}{3} + \frac{4}{5} - \frac{4}{7} + \cdots\!

This is now known as the Madhava–Leibniz series[33][34] or Gregory-Leibniz series since it was rediscovered by James Gregory and Gottfried Leibniz in the 17th century. Unfortunately, the rate of convergence is too slow to calculate many digits in practice; about 4,000 terms must be summed to improve upon Archimedes' estimate. However, by transforming the series into

\pi = \sqrt{12} \, \left(1-\frac{1}{3 \cdot 3} + \frac{1}{5 \cdot 3^2} - \frac{1}{7 \cdot 3^3} + \cdots\right)\!

Madhava was able to calculate π as 3.14159265359, correct to 11 decimal places. The record was beaten in 1424 by the Persian mathematician, Jamshīd al-Kāshī, who determined 16 decimals of π.

The first major European contribution since Archimedes was made by the German mathematician Ludolph van Ceulen (1540–1610), who used a geometric method to compute 35 decimals of π. He was so proud of the calculation, which required the greater part of his life, that he had the digits engraved into his tombstone.[35]

Around the same time, the methods of calculus and determination of infinite series and products for geometrical quantities began to emerge in Europe. The first such representation was the Viète's formula,

\frac2\pi = \frac{\sqrt2}2 \cdot \frac{\sqrt{2+\sqrt2}}2 \cdot \frac{\sqrt{2+\sqrt{2+\sqrt2}}}2 \cdot \cdots\!

found by François Viète in 1593. Another famous result is Wallis' product,

\frac{\pi}{2} = \frac{2}{1} \cdot \frac{2}{3} \cdot \frac{4}{3} \cdot \frac{4}{5} \cdot \frac{6}{5} \cdot \frac{6}{7} \cdot \frac{8}{7} \cdot \frac{8}{9} \cdots\!

by John Wallis in 1655. Isaac Newton himself derived a series for π and calculated 15 digits, although he later confessed: "I am ashamed to tell you to how many figures I carried these computations, having no other business at the time."[36]

In 1706 John Machin was the first to compute 100 decimals of π, using the formula

\frac{\pi}{4} = 4 \, \arctan \frac{1}{5} - \arctan \frac{1}{239}\!

with

\arctan \, x = x - \frac{x^3}{3} + \frac{x^5}{5} - \frac{x^7}{7} + \cdots\!

Formulas of this type, now known as Machin-like formulas, were used to set several successive records and remained the best known method for calculating π well into the age of computers. A remarkable record was set by the calculating prodigy Zacharias Dase, who in 1844 employed a Machin-like formula to calculate 200 decimals of π in his head at the behest of Gauss. The best value at the end of the 19th century was due to William Shanks, who took 15 years to calculate π with 707 digits, although due to a mistake only the first 527 were correct. (To avoid such errors, modern record calculations of any kind are often performed twice, with two different formulas. If the results are the same, they are likely to be correct.)

Theoretical advances in the 18th century led to insights about π's nature that could not be achieved through numerical calculation alone. Johann Heinrich Lambert proved the irrationality of π in 1761, and Adrien-Marie Legendre also proved in 1794 π2 to be irrational. When Leonhard Euler in 1735 solved the famous Basel problem – finding the exact value of

\frac{1}{1^2} + \frac{1}{2^2} + \frac{1}{3^2} + \frac{1}{4^2} + \cdots\!

which is π2/6, he established a deep connection between π and the prime numbers. Both Legendre and Leonhard Euler speculated that π might be transcendental, which was finally proved in 1882 by Ferdinand von Lindemann.

William Jones' book A New Introduction to Mathematics from 1706 is said to be the first use of the Greek letter π for this constant, but the notation became particularly popular after Leonhard Euler adopted it in 1737.[37] He wrote:

There are various other ways of finding the Lengths or Areas of particular Curve Lines, or Planes, which may very much facilitate the Practice; as for instance, in the Circle, the Diameter is to the Circumference as 1 to (16/5 − 4/239) − 1/3(16/53 − 4/2393) + ... = 3.14159... = π[4]}}

Computation in the computer age

The advent of digital computers in the 20th century led to an increased rate of new π calculation records. John von Neumann et al. used ENIAC to compute 2037 digits of π in 1949, a calculation that took 70 hours. [38][39] Additional thousands of decimal places were obtained in the following decades, with the million-digit milestone passed in 1973. Progress was not only due to faster hardware, but also new algorithms. One of the most significant developments was the discovery of the fast Fourier transform (FFT) in the 1960s, which allows computers to perform arithmetic on extremely large numbers quickly.

In the beginning of the 20th century, the Indian mathematician Srinivasa Ramanujan found many new formulas for π, some remarkable for their elegance and mathematical depth.[40] One of his formulas is the series,

\frac{1}{\pi} = \frac{2 \sqrt 2}{9801} \sum_{k=0}^\infty \frac{(4k)!(1103+26390k)}{(k!)^4 396^{4k}}\!

and the related one found by the Chudnovsky brothers in 1987,

\frac{426880 \sqrt{10005}}{\pi} = \sum_{k=0}^\infty \frac{(6k)! (13591409 + 545140134k)}{(3k)!(k!)^3 (-640320)^{3k}}\!

which deliver 14 digits per term.[40] The Chudnovskys used this formula to set several π computing records in the end of the 1980s, including the first calculation of over one billion (1,011,196,691) decimals in 1989. It remains the formula of choice for π calculating software that runs on personal computers, as opposed to the supercomputers used to set modern records.

Whereas series typically increase the accuracy with a fixed amount for each added term, there exist iterative algorithms that multiply the number of correct digits at each step, with the downside that each step generally requires an expensive calculation. A breakthrough was made in 1975, when Richard Brent and Eugene Salamin independently discovered the Brent–Salamin algorithm, which uses only arithmetic to double the number of correct digits at each step.[41] The algorithm consists of setting

and iterating

a_{n+1} = \frac{a_n+b_n}{2} \quad \quad \quad b_{n+1} = \sqrt{a_n b_n}\!
t_{n+1} = t_n - p_n (a_n-a_{n+1})^2 \quad \quad \quad p_{n+1} = 2 p_n\!

until an and bn are close enough. Then the estimate for π is given by

\pi \approx \frac{(a_n + b_n)^2}{4 t_n}.\!

Using this scheme, 25 iterations suffice to reach 45 million correct decimals. A similar algorithm that quadruples the accuracy in each step has been found by Jonathan and Peter Borwein.[42] The methods have been used by Yasumasa Kanada and team to set most of the π calculation records since 1980, up to a calculation of 206,158,430,000 decimals of π in 1999. The current record is 2,576,980,370,000 decimals, set by Daisuke Takahashi on the T2K-Tsukuba System, a supercomputer at the University of Tsukuba northeast of Tokyo.[43]

An important recent development was the Bailey–Borwein–Plouffe formula (BBP formula), discovered by Simon Plouffe and named after the authors of the paper in which the formula was first published, David H. Bailey, Peter Borwein, and Plouffe.[44] The formula,

\pi = \sum_{k=0}^\infty \frac{1}{16^k} \left( \frac{4}{8k + 1} - \frac{2}{8k + 4} - \frac{1}{8k + 5} - \frac{1}{8k + 6}\right),

is remarkable because it allows extracting any individual hexadecimal or binary digit of π without calculating all the preceding ones.[44] Between 1998 and 2000, the distributed computing project PiHex used a modification of the BBP formula due to Fabrice Bellard to compute the quadrillionth (1,000,000,000,000,000:th) bit of π, which turned out to be 0.[45]

In 2006, Simon Plouffe, using the integer relation algorithm PSLQ, found a series of beautiful formulas.[46] Let q = eπ, then

\frac{\pi}{24} = \sum_{n=1}^\infty \frac{1}{n} \left(\frac{3}{q^n-1} - \frac{4}{q^{2n}-1} + \frac{1}{q^{4n}-1}\right)

\frac{\pi^3}{180} = \sum_{n=1}^\infty \frac{1}{n^3} \left(\frac{4}{q^n-1} - \frac{5}{q^{2n}-1} + \frac{1}{q^{4n}-1}\right)

and others of form,

\pi^k = \sum_{n=1}^\infty \frac{1}{n^k} \left(\frac{a}{q^n-1} + \frac{b}{q^{2n}-1} + \frac{c}{q^{4n}-1}\right)

where q = eπ, k is an odd number, and a, b, c are rational numbers. If k is of the form 4m + 3, then the formula has the particularly simple form,

p\pi^k = \sum_{n=1}^\infty \frac{1}{n^k} \left(\frac{2^{k-1}}{q^n-1} - \frac{2^{k-1}+1}{q^{2n}-1} + \frac{1}{q^{4n}-1}\right)

for some rational number p where the denominator is a highly factorable number, though no rigorous proof has yet been given.

Pi and continued fraction

The sequence of partial denominators of the simple continued fraction of π does not show any obvious pattern:

\pi=[3;7,15,1,292,1,1,1,2,1,3,1,14,2,1,1,2,2,2,2,1,84,\cdots]

or

{\pi=3+{}}\cfrac{1}{7+\cfrac{1}{15+\cfrac{1}{1+\cfrac{1}{292+\cfrac{1}{1+\cfrac{1}{1+\cfrac{1}{1+\cfrac{1}{2+\cfrac{1}{1+\cfrac{1}{3+\cfrac{1}{1+\cfrac{1}{14+\cfrac{1}{2+\cfrac{1}{1+\cfrac{1}{1+\ddots}}}}}}}}}}}}}}}

However, there are generalized continued fractions for π with a perfectly regular structure, such as:

{\pi=3+\cfrac{1^2}{6+\cfrac{3^2}{6+\cfrac{5^2}{6+\cfrac{7^2}{6+\cfrac{9^2}{6+\cfrac{11^2}{6+\cfrac{13^2}{6+\cfrac{15^2}{6+\ddots}}}}}}}} =\cfrac{4}{1+\cfrac{1^2}{3+\cfrac{2^2}{5+\cfrac{3^2}{7+\cfrac{4^2}{9+\cfrac{5^2}{11+\cfrac{6^2}{13+\cfrac{7^2}{15+\ddots}}}}}}}}}

Memorizing digits
Main article: Piphilology
Recent decades have seen a surge in the record for number of digits memorized.

Even long before computers have calculated π, memorizing a record number of digits became an obsession for some people. In 2006, Akira Haraguchi, a retired Japanese engineer, claimed to have recited 100,000 decimal places.[47] This, however, has yet to be verified by Guinness World Records. The Guinness-recognized record for remembered digits of π is 67,890 digits, held by Lu Chao, a 24-year-old graduate student from China.[48] It took him 24 hours and 4 minutes to recite to the 67,890th decimal place of π without an error.[49]

On June, 17th, 2009 Andriy Slyusarchuk, a Ukrainian neurosurgeon, medical doctor and professor claimed to have memorized 30 million digits of pi, which were printed in 20 volumes of text [50]. He has been officially congratulated by the President of Ukraine Viktor Yuschenko. A possibility of financing a dedicated research center for development of Mr. Slyusarchuk's methodology had been discussed.[51][52]

There are many ways to memorize π, including the use of "piems", which are poems that represent π in a way such that the length of each word (in letters) represents a digit. Here is an example of a piem, originally devised by Sir James Jeans: How I need (or: want) a drink, alcoholic in nature (or: of course), after the heavy lectures (or: chapters) involving quantum mechanics.[53][54] Notice how the first word has 3 letters, the second word has 1, the third has 4, the fourth has 1, the fifth has 5, and so on. The Cadaeic Cadenza contains the first 3834 digits of π in this manner.[55] Piems are related to the entire field of humorous yet serious study that involves the use of mnemonic techniques to remember the digits of π, known as piphilology. In other languages there are similar methods of memorization. However, this method proves inefficient for large memorizations of π. Other methods include remembering patterns in the numbers.[56]

Numerical approximations
Main article: History of numerical approximations of π

Due to the transcendental nature of π, there are no closed form expressions for the number in terms of algebraic numbers and functions.[12] Formulas for calculating π using elementary arithmetic typically include series or summation notation (such as "..."), which indicates that the formula is really a formula for an infinite sequence of approximations to π.[57] The more terms included in a calculation, the closer to π the result will get.

Consequently, numerical calculations must use approximations of π. For many purposes, 3.14 or 22/7 is close enough, although engineers often use 3.1416 (5 significant figures) or 3.14159 (6 significant figures) for more precision. The approximations 22/7 and 355/113, with 3 and 7 significant figures respectively, are obtained from the simple continued fraction expansion of π. The approximation 355⁄113 (3.1415929…) is the best one that may be expressed with a three-digit or four-digit numerator and denominator.[58][59][60]

The earliest numerical approximation of π is almost certainly the value 3.[32] In cases where little precision is required, it may be an acceptable substitute. That 3 is an underestimate follows from the fact that it is the ratio of the perimeter of an inscribed regular hexagon to the diameter of the circle.

Open questions

The most pressing open question about π is whether it is a normal number—whether any digit block occurs in the expansion of π just as often as one would statistically expect if the digits had been produced completely "randomly", and that this is true in every integer base, not just base 10.[61] Current knowledge on this point is very weak; e.g., it is not even known which of the digits 0,…,9 occur infinitely often in the decimal expansion of π.[62]

Bailey and Crandall showed in 2000 that the existence of the above mentioned Bailey-Borwein-Plouffe formula and similar formulas imply that the normality in base 2 of π and various other constants can be reduced to a plausible conjecture of chaos theory.[63]

It is also unknown whether π and e are algebraically independent, although Yuri Nesterenko proved the algebraic independence of {π, eπ, Γ(1/4)} in 1996.[64]

Use in mathematics and science
Main article: List of formulas involving π

π is ubiquitous in mathematics, appearing even in places that lack an obvious connection to the circles of Euclidean geometry.[65]

Geometry and trigonometry

For any circle with radius r and diameter d = 2r, the circumference is πd and the area is πr2. Further, π appears in formulas for areas and volumes of many other geometrical shapes based on circles, such as ellipses, spheres, cones, and tori.[66] Accordingly, π appears in definite integrals that describe circumference, area or volume of shapes generated by circles. In the basic case, half the area of the unit disk is given by:[67]

\int_{-1}^1 \sqrt{1-x^2}\,dx = \frac{\pi}{2}

and

\int_{-1}^1\frac{1}{\sqrt{1-x^2}}\,dx = \pi

gives half the circumference of the unit circle.[66] More complicated shapes can be integrated as solids of revolution.[68]

From the unit-circle definition of the trigonometric functions also follows that the sine and cosine have period 2π. That is, for all x and integers n, sin(x) = sin(x + 2πn) and cos(x) = cos(x + 2πn). Because sin(0) = 0, sin(2πn) = 0 for all integers n. Also, the angle measure of 180° is equal to π radians. In other words, 1° = (π/180) radians.

In modern mathematics, π is often defined using trigonometric functions, for example as the smallest positive x for which sin x = 0, to avoid unnecessary dependence on the subtleties of Euclidean geometry and integration. Equivalently, π can be defined using the inverse trigonometric functions, for example as π = 2 arccos(0) or π = 4 arctan(1). Expanding inverse trigonometric functions as power series is the easiest way to derive infinite series for π.

Complex numbers and calculus
Euler's formula depicted on the complex plane. Increasing the angle φ to π radians (180°) yields Euler's identity.

A complex number z can be expressed in polar coordinates as follows:

z = r\cdot(\cos\varphi + i\sin\varphi)

The frequent appearance of π in complex analysis can be related to the behavior of the exponential function of a complex variable, described by Euler's formula

e^{i\varphi} = \cos \varphi + i\sin \varphi \!

where i is the imaginary unit satisfying i2 = −1 and e ≈ 2.71828 is Euler's number. This formula implies that imaginary powers of e describe rotations on the unit circle in the complex plane; these rotations have a period of 360° = 2π. In particular, the 180° rotation φ = π results in the remarkable Euler's identity

e^{i \pi} = -1.\!

e^{i \pi} + 1 = 0.\!
Euler's identity is famous for linking several basic mathematical constants and operators.

There are n different n-th roots of unity

e^{2 \pi i k/n} \qquad (k = 0, 1, 2, \dots, n - 1).

The Gaussian integral

\int_{-\infty}^{\infty}e^{-x^2}dx=\sqrt{\pi}.

A consequence is that the gamma function of a half-integer is a rational multiple of √π.

Physics

Although not a physical constant, π appears routinely in equations describing fundamental principles of the Universe, due in no small part to its relationship to the nature of the circle and, correspondingly, spherical coordinate systems. Using units such as Planck units can sometimes eliminate π from formulae.

* The cosmological constant:[69]

\Lambda = {{8\pi G} \over {3c^2}} \rho

* Heisenberg's uncertainty principle, which shows that the uncertainty in the measurement of a particle's position (Δx) and momentum (Δp) can not both be arbitrarily small at the same time:[70]

\Delta x\, \Delta p \ge \frac{h}{4\pi}

* Einstein's field equation of general relativity:[71]

R_{ik} - {g_{ik} R \over 2} + \Lambda g_{ik} = {8 \pi G \over c^4} T_{ik}

* Coulomb's law for the electric force, describing the force between two electric charges (q1 and q2) separated by distance r:[72]

F = \frac{\left|q_1q_2\right|}{4 \pi \varepsilon_0 r^2}

* Magnetic permeability of free space:[73]

\mu_0 = 4 \pi \cdot 10^{-7}\,\mathrm{N/A^2}\,

* Kepler's third law constant, relating the orbital period (P) and the semimajor axis (a) to the masses (M and m) of two co-orbiting bodies:

\frac{P^2}{a^3}={(2\pi)^2 \over G (M+m)}

Probability and statistics

In probability and statistics, there are many distributions whose formulas contain π, including:

* the probability density function for the normal distribution with mean μ and standard deviation σ, due to the Gaussian integral:[74]

f(x) = {1 \over \sigma\sqrt{2\pi} }\,e^{-(x-\mu )^2/(2\sigma^2)}

* the probability density function for the (standard) Cauchy distribution:[75]

f(x) = \frac{1}{\pi (1 + x^2)}.

Note that since \int_{-\infty}^{\infty} f(x)\,dx = 1 for any probability density function f(x), the above formulas can be used to produce other integral formulas for π.[76]

Buffon's needle problem is sometimes quoted as a empirical approximation of π in "popular mathematics" works. Consider dropping a needle of length L repeatedly on a surface containing parallel lines drawn S units apart (with S > L). If the needle is dropped n times and x of those times it comes to rest crossing a line (x > 0), then one may approximate π using the Monte Carlo method:[77][78][79][80]

\pi \approx \frac{2nL}{xS}.

Though this result is mathematically impeccable, it cannot be used to determine more than very few digits of π by experiment. Reliably getting just three digits (including the initial "3") right requires millions of throws,[77] and the number of throws grows exponentially with the number of digits desired. Furthermore, any error in the measurement of the lengths L and S will transfer directly to an error in the approximated π. For example, a difference of a single atom in the length of a 10-centimeter needle would show up around the 9th digit of the result. In practice, uncertainties in determining whether the needle actually crosses a line when it appears to exactly touch it will limit the attainable accuracy to much less than 9 digits.

Pi in popular culture
A whimsical "Pi plate".

Probably because of the simplicity of its definition, the concept of pi and, especially its decimal expression, have become entrenched in popular culture to a degree far greater than almost any other mathematical construct.[81] It is, perhaps, the most common ground between mathematicians and non-mathematicians.[82] Reports on the latest, most-precise calculation of π (and related stunts) are common news items.[83]

Pi Day (March 14, from 3.14) is observed in many schools.[84] At least one cheer at the Massachusetts Institute of Technology includes "3.14159!"[85] One can buy a "Pi plate": a pie dish with both "π" and a decimal expression of it appearing on it.[86] On November 7, 2005, Kate Bush released the album, Aerial. The album contains the song "π" whose lyrics consist principally of Ms. Bush singing the digits of π to music, beginning with "3.14[87]
Spes mea in Deo est

Eylül 02, 2009, 11:08:00 ös
Yanýtla #11
• Orta Dereceli Uye
• Ýleti: 259
• Cinsiyet:

##### Ynt: Mavi Loca
Sayın Lux_e_Tenebris ; çok teşekkürler  anladım , örnek çok güzeldi.

Saygılar, sevgiler...
Her þey bir adýmla baþlar...

Eylül 02, 2009, 11:10:39 ös
Yanýtla #12
• Skoç Riti Masonu
• Aktif Uye
• Ýleti: 758
• Cinsiyet:

##### Ynt: Mavi Loca
Umarim faydali olabilmisimdir. Tabii ki bu demek degildir ki yuksek derecelerdeki kardeslerimiz diger kardeslerimizden cok daha engin bilgili olacak. Hic bir rite uye olmayip da bir cok engin bilgiye sahip olan kardeslerimiz de mevcuttur.
Spes mea in Deo est

Eylül 02, 2009, 11:13:16 ös
Yanýtla #13
• Orta Dereceli Uye
• Ýleti: 259
• Cinsiyet:

##### Ynt: Mavi Loca
Her zamanki gibi faydalı oldunuz , müteşekkîrim.

Tabii ki bu demek degildir ki yuksek derecelerdeki kardeslerimiz diger kardeslerimizden cok daha engin bilgili olacak. Hic bir rite uye olmayip da bir cok engin bilgiye sahip olan kardeslerimiz de mevcuttur.

Elbette ki öyledir.

Saygılar, sevgiler...
Her þey bir adýmla baþlar...

Eylül 03, 2009, 12:20:36 öö
Yanýtla #14
• Ziyaretçi

##### Ynt: Mavi Loca
Sayın Lux e Tenebris ,

İskoç Riti ' ne  üye olduğunuza  göre ,size  merak ettiğim bir soruyu  sormak istiyorum :

Resmi  toplantılarınızda  geleneksel  iskoç  eteği  giymeyi  tercih edenleriniz  var mıdır ?

Yoksa  geleneksel  giyim  sadece  tarihisel  midir  ?  Yani  günümüzde artık uygulayan  yok mudur ?

Uygulayan  var ise  belirli  bir  anlam taşıyabilmekte midir ?

Veyahut da İskoç Riti ' ne üye  olmakla  iskoç eteği giymenin uzaktan yakından alakası yok mudur ?

Saygılarımla

Eylül 03, 2009, 02:27:30 öö
Yanýtla #15
• Uzman Uye
• Ýleti: 9553
• Cinsiyet:

##### Ynt: Mavi Loca
Sayin ozak1977,

Bahsetmis oldugunuz gibi toplantilarda Iskoc etegi giymek gibi bir durum soz konusu degildir.

Saygilarimla
- Sahsima ozel mesaj atmadan once Yonetim Hiyerarsisini izleyerek ilgili yoneticiler ile gorusunuz.
- Masonluk hakkinda ozel mesaj ile bilgi, yardim ve destek sunulmamaktadir.
- Sorunuz ve mesajiniz hangi konuda ise o konudan sorumlu gorevli yada yonetici ile gorusunuz. Sahsim, butun cabalarinizdan sonra gorusmeniz gereken en son kisi olmalidir.
- Sadece hicbir yoneticinin cozemedigi yada forumda asla yazamayacaginiz cok ozel ve onemli konularda sahsima basvurmalisiniz.
- Masonluk ve Masonlar hakkinda bilgi almak ve en onemlisi kisisel yardim konularinda tarafima dogrudan ozel mesaj gonderenler cezalandirilacaktir. Bu konular hakkinda gerekli aciklama forum kurallari ve uyelik sozlesmesinde yeterince acik belirtilmsitir.

Eylül 03, 2009, 08:26:25 ös
Yanýtla #16
• Skoç Riti Masonu
• Aktif Uye
• Ýleti: 758
• Cinsiyet:

##### Ynt: Mavi Loca
Sayın Lux e Tenebris ,

İskoç Riti ' ne  üye olduğunuza  göre ,size  merak ettiğim bir soruyu  sormak istiyorum :

Resmi  toplantılarınızda  geleneksel  iskoç  eteği  giymeyi  tercih edenleriniz  var mıdır ?

Yoksa  geleneksel  giyim  sadece  tarihisel  midir  ?  Yani  günümüzde artık uygulayan  yok mudur ?

Uygulayan  var ise  belirli  bir  anlam taşıyabilmekte midir ?

Veyahut da İskoç Riti ' ne üye  olmakla  iskoç eteği giymenin uzaktan yakından alakası yok mudur ?

Saygılarımla
Sn. Ozak1977 Sn. Mason'un da cevaplamis oldugu gibi boyle bir gelenek veya bir giyim kurali yoktur.
Spes mea in Deo est

### Benzer Konular

Konu / Baþlatan Yanýt Son Gönderilen:
43 Yanýt
42441 Gösterim
Þubat 22, 2013, 11:26:30 ös
Gönderen: VARLIK
0 Yanýt
2811 Gösterim
Nisan 21, 2007, 04:13:28 öö
Gönderen: Supeluta
0 Yanýt
2478 Gösterim
Eylül 23, 2007, 11:34:25 ös
Gönderen: LuckyEye2
5 Yanýt
5402 Gösterim
Aðustos 20, 2010, 01:20:29 ös
Gönderen: Theory
0 Yanýt
2322 Gösterim
Kasým 17, 2009, 07:49:27 ös
Gönderen: zarathustra
0 Yanýt
3102 Gösterim
Nisan 07, 2010, 12:47:05 ös
17 Yanýt
17077 Gösterim
Þubat 18, 2011, 04:55:30 ös
Gönderen: sundance
2 Yanýt
7884 Gösterim
Þubat 21, 2013, 02:10:15 öö
Gönderen: NOSAM33
5 Yanýt
9826 Gösterim
Kasým 07, 2014, 01:37:26 öö
Gönderen: ayilmaz92
15 Yanýt
10222 Gösterim
Þubat 10, 2015, 05:31:33 ös